BladeMarch 2021的目錄

Tell us what knife you carry. Add a little history or an anecdote. Try to include a photograph—if digital, at least 600 KB but no larger than 2 MB—of you with your knife. We will publish your comments in an upcoming “The Knife I Carry.” Your name will then be entered in a drawing to win a free, high-quality, namebrand knife. The drawing will be May 15. Mail to: BLADE ®, 5600 W. Grande Market Dr., Ste. 100, Appleton, WI 54913, or e-mail steve@blademag.com. If you send your entry by e-mail, please include your physical mailing address in case you win the knife.…

ICCE SHOW p. 12 Shayne Carter, Dept. BL3, 5302 Rosewood Cir., Payson, UT 84651 Contact: 801-913-0181, shaynemcarter@hotmail.com; Wilson W. Capron, wkcapron@gmail.com; Larry Cox, Dept. BL3, 701 W. 13th St, Murfreesboro, AR 71958 Contact: 870-258-2429, (fax) Cell: 870-557-8062, cox870@windstream.net; Rick Dunkerley, Dept. BL3, PO Box 601, Lincoln, MT 59639 Contact: 406-210-4101, dunkerleyknives@gmail.com dunkerleyknives.com; Dennis Friedly, Dept. BL3, 12 Cottontail Lane E, Cody, WY 82414 Contact: 307-527-6811, friedlyknives@hotmail.com friedlyknives.com; Rick Genovese, Dept. BL3, 17802 South Oak Drive, Peeples Valley, AZ 86332 Contact: 916-693-3979, genoveseknives@hotmail.com, rickgenoveseknives.com; Jerry Moen, Dept. BL3, 4478 Spring Valley Rd., Dallas, TX 75244 Contact: 972-839-1609, jmoen@moencustomknives.com, moencustomknives.com; Tom Overeynder, Dept. BL3, 1800 S. Davis Dr, Arlington, TX 76013 Contact: 817-277-4812, trovereynder@gmail.com or tom@overeynderknives.com, overeynderknives.com; Mike Zieba, Dept. BL3, 95 Commercial St., #4, Brooklyn, NY 11222 Contact: 347-335-9944, ziebametal@gmail.com, ziebaknives.com…

Knife guys love gadgets, fix-it people love gadgets and DIY-ers love gadgets, so it’s easy to see why multi-tools do so well in the knife market. Th ough not knives per se, they off er more versatility than just cutting ability by off ering on-board tools. With broader appeal than knives, multi-tools have a further reach and encompass more markets, too. Th ey appeal to folks who like to be prepared. In addition to DIY-ers, campers, hunters, fishermen, hikers, mountain bikers and anyone who enjoys outdoor activities benefits from owning and using a multi-tool. It performs in-field repairs on equipment when you do not have access to regular tools. It can mean the difference between bowing out of a camping trip because of equipment failure, or performing an expedient in-field…

VISIT US ONLINE AT WWW.BLADEMAG.COM TO: • Sign up for our free newsletter.• Renew your magazine subscription. There’s a subscription link in the nav bar.• Comment on our site stories written by BLADE® staff members and others. LOOK FOR BLADE MAGAZINE ON: SUBSCRIPTION SERVICES: Visit us on the Web at www.blademag.com or call 877-485-6426. Outside USA: 386-246-3419. BOOK SALES: Visit us at www.gundigeststore.com or call 920-471-4522. BACK ISSUES FOR SALE: Subject to Availability. Call 920-471-4522. ADVERTISING: Contact Lori McDaniel at 715-498-3768 or lori@gundigest.com, or request a media kit by writing to: BLADE, 5600 W. Grande Market Dr., Appleton, WI 54913. LETTERS OR ARTICLE SUBMISSIONS: Steve Shackleford, Editor BLADE Magazine 5600 W. Grande Market Dr., Ste. 100 Appleton, WI 54913 or email steve@blademag.com.…

Bright and eye-catching copper and brass—the latter a popular alloy of copper and zinc known since ancient times—have found renewed interest among knife enthusiasts, not only for the materials’ good looks but also for their utility and complementary performance in handles, spacers and other knife components. The GiantMouse/Ace Clyde, Kershaw Leek, CRKT Pilar, and DPx Gear HEST/F Urban are representative of knives that sport the warm look and feel of copper or brass, and support increasing customer demand while validating the user-friendly style and performance that the materials add to the overall experience. “We wanted the Clyde to be a ‘classy’ looking folder,” explained knifemaker Jesper Voxnaes, designer and company co-founder at GiantMouse/Ace. “Brass especially was found in lots of knives we grew up with, and we like the look…

SPEC CHART KNIFE NAME: Brown Widow BLADE LENGTH: 3 3/8” BLADE MATERIAL: O1 tool steel BOLSTERS: Mosaic damascus OVERALL LENGTH: 8 3/8” SHEATH: By Larry Parsons MAKER: Terry Schreiner, Dept. BL3, 2085 West Elk Ave., Duncan, OK 73533 580-255-4880 Rhino969@hotmail.com (Caleb Royer image) SPEC CHART KNIFE NAME: Campers Companion BLADE LENGTH: 3” BLADE MATERIAL: O1 tool steel BLADE GRIND: Hollow KNIFE TO KNOW: Blade flats are forge finished HANDLE: Desert ironwood burl HANDLE PINS: One mosaic and three brass LINERS: Coyote tan OVERALL LENGTH: 6 5/8” MAKER’S LIST PRICE FOR A SIMILAR PIECE: $375 MAKER: Chris Taylor, Dept. BL3, 9425 Ray Harrington Rd., Decatur, AR 72722 479-426-7720 taylormadeknives@zoho.com, Instagram and Facebook: https://instagram.com/taylormadeknives/ and https://www.facebook.com/TaylorMadeKnives (Caleb Royer image) KNIFE: Double-lugged full integral fixed blade BLADE LENGTH: 12.25” TANG: Tapered HANDLE MATERIAL:…

Steve Randall outfits the 11-inch blade of his bowie in a mosaic damascus pattern he calls Cardiac Arrest. As BLADE® field Les Robertson notes in his story on some of today’s hottest damascus patterns, “Steve is an ABS master smith whose work never ceases to amaze or disappoint!” The handle is ancient walrus ivory and the guard and ferrule are damascus. Overall length: 16 inches. Steve built a custom-made leather sheath to accompany the knife. The image is by SharpByCoop. For more on Steve’s bowie and other knives in top damascus patterns, see page 56. At the upper right is the Step-Up Fillet Knife by White River Knife & Tool, which also supplied the image. For more on it and other of today’s latest fillet knives, see page 34. At…

“I purchased this Camillus CUDA in the late 1990s. The strange thing is it says ‘CUDA’ on the blade and not Camillus, and ‘Made in USA.’ I carried it for about 20 years when I was in law enforcement, and used it several times to cut seat belts and other items to gain access. All the later CUDA knives I see have a drop-point blade, and I’ve yet to find another with a tanto blade like mine. It holds an edge for a very long time and fits the hand nicely.” Thomas Sailers, Belmont, California “Carrying a knife on a daily basis is a religion with me. I carry an old A.G. Russell One-Hand knife. It opens easily and cuts like a good knife should.” Glynda Riley, a letter via…

Editor’s note: In December of last year, knifemaker Toby Hill notified BLADE® of an intriguing find of an old sword about 20 miles south of Pleasanton in southern Texas. Two of Toby’s friends found the sword while arrowhead hunting on a family ranch after a morning deer hunt. Though caked with rust and minus parts of the handle, the sword looked an awful lot like it could have been carried by a soldier in the Mexican Army circa 1836—the year of the Battle of the Alamo. On this, the 185th anniversary of the famous conflict in San Antonio, the find seemed most propitious for a story. Enter BLADE Magazine Cutlery Hall-Of-Fame® member James L. Batson, one of the foremost authorities on Cutlery Hall-Of-Famer James Bowie, bowie knives of all stripes,…

Damascus steel has been around for centuries. However, it wasn’t until the 1970s that it was introduced to modern custom knives by a handful of bladesmiths in the United States, with BLADE Magazine Cutlery Hall-Of-Fame® member Bill Moran leading the way. Damascus gained traction among members of the American Bladesmith Society, which, along with Moran, was founded in 1976 by ABS master smiths Bill Bagwell and Don Hastings, and Cutlery Hall-Of-Famer/BLADE® field editor B.R. Hughes. From that point forward, more makers and more patterns began showing up at custom knife shows and in knife magazines. As the popularity of fixed blades waned and gave way to tactical folders, most notable makers of the latter started using damascus for their blades and bolsters. Now, as with all markets, the wheel has…

FEBRUARY CANCELED! SEE AUGUST FOR NEW DATES! FEB. 26-27 LITTLE ROCK, AR Arkansas Custom Knife Show, Statehouse Convention Center. Visit artknife.com for more information.* FEB. 27-28 LEWISBURG, PA The 32nd Annual Keystone Blade Association Knife Show, Country Cupboard Inn. Contact Skip Fryling 570-204-1544 knifeguy248@yahoo.com.* MARCH MARCH 5-6 GODFREY, IL Bunker Hill Knife Club Show, Alton-Wood River Sportsmen’s Club. Contact Gene Winston 618-288-6974 genewinston@yahoo.com.* MARCH 5-6 TROY, OH Spirit of the Blade Custom Knife Show, Miami County Fairgrounds, Duke-Lundgard Building. Contact Misty and Joel Worley 937-638-9518 maplewoodforge@gmail.com facebook.com/sotbcustomknifeshow/. CANCELED! MARCH 12-15 NURNBERG, GERMANY The IWA Show, for the trade only. For more information visit iwa.info. MARCH 26-27 FORT WORTH, TX International Custom Cutlery Exposition, Fort Worth Stockyards, under new BLADE Show management (page 92). Contact BLADE®, c/o Alicia Newton blade@bladeshow.com.* **…

Since 21-year-old Jarrod Fiscus won with an axe in his appearance on Forged in Fire and also participates in frontier rendezvous events, it seems most appropriate that he would build a traditional pipe tomahawk. Jarrod handforged the head of 1080 carbon steel and the body of mild steel. He then forge-welded the pipe to the body. He said the “weeping heart” cutout is a design used frequently in Colonial days, from the Eastern woodlands to the Great Plains. Jarrod dyed the curly maple haft in the traditional manner with nitric acid. He poured the pewter inlays directly into the wood. He finished it all up with a brass cap and a mule deer antler plug. As Jarrod noted, “This hawk is a fully functional, smokable piece of art.” SPEC CHECK…