Profiの January 2026 の目次

Lemken surprised Agritechnica show goers with its first proper direct drill, the Solitair NT which has been tested in the UK this year. The NT project has been on the go for over three years and is a Lemken machine that uses some of the Equalizer team know-how – Lemken bought the South African, Equalizer direct drill manufacturer in 2023. For now, there is just a 6.0m drill, but there are definite plans to make wider versions with the possibility of smaller drills after that. Getting the seed in the ground is the new Pro Disc coulter, a 480mm disc angled at an undercut of 10 degrees and 7 degrees in the direction of travel. Down pressure is carried out hydraulically, with the ram on each opener linked to a…

With a tub capacity of 64m3, the Biga Mega Mammoet trailed mixer wagon from Dutch manufacturer Peecon feeds 400 cows at a time and is aimed at European farms with around 2,000 cows at multiple locations. The three-stage powershift softens the start-up load, but a tractor with at least 300hp is needed to power the four vertical augers. The 25t+ of mixed material exits through up to four hydraulically operated discharge doors. With three-steered axles and full road approval, the four-axled wagon, which weighs 27t, costs around €200,000. The company has delivered a number of units this year. The show machine is sold to a Belgian dairy farm. Another one of the 12m-long wagons has gone to Denmark, a few units are running in Poland and Ukraine.…

Bigger foragers need bigger tools, and Kemper, Claas and Krone all showed 16-row 12m-wide maize headers. The Krone unit is on a special one-off full black version of the Big X 1180, signed by Bernard Krone. The German company confirms that the 14-row XCollect will be out next year and on sale from 2027, but we are unlikely to see the 16-row version until the next generation of wide-bodied Big X is released. They will not say when this could be. The biggest challenge is figuring out the folding and getting this down to 3.0m while ensuring good visibility out through the front of the forage harvester when the header is folded. It is 10 years since Kemper stunned Agritechnica visitors with a 20-row maize header study model. Numerous ideas…

Agritechnica provided the first opportunity in Europe to see John Deere’s E-Power 130hp electric tractor prototype, the development goal being to give it the look and feel and match the performance of a 130hp (100kW) diesel. With configurable options for cab type, axles, tyres, and up to five Kreisel 39kWh batteries, 87kW of power is available at the pto and 82kW for the electric drivetrain. Able to conduct several hours of light work, such as tedding, spraying or raking, swapping batteries is said to be quick and easy, and the company is exploring various charging solutions. Compatible with existing implements, the E Power tractor has the capability to provide off-board electricity, but this has not yet been done on the prototype. The Agritechnica tractor will remain in Europe. First stop…

New Holland’s TH Hybrid Power concept is based on a TH7.40, but then with the diesel engine swapped for a fully electric drivetrain. The hybrid concept disconnects the drivetrain from the hydraulics with the 70kWh battery providing 154hp (115kW) for the driveline and 112hp (84kW) for the hydraulics. The battery provides electrical power in both hybrid and full electric modes. Energy savings of up to 70% are claimed compared to the diesel handler, and 30% better performance during typical material handling operations. The trump card is the connection of the battery to a four-cylinder FPT methane gas engine. This range extender is said to overcome the run-time limitations of battery-only machines in that the gas engine recharges the battery and provides supplementary power when needed. The engine is only used…

Massey Ferguson’s five-model range of 5S tractors is now available with the new option of a CVT. Complementing the existing Dyna-4 and Dyna-6 versions, the Dyna-VT transmission in the 5S allows stepless speed adjustment from 0.1 to 40km/hr. Speed control is by the foot accelerator pedal, the hand throttle lever or the Power Control lever, and the maximum speed is reached at 1,550rpm. Dyna-VT models also come with new front and rear axles, a new hydraulic system, and a new rear linkage and hitch. A three-speed PTO with 540, 540 Eco or 1,000rpm output is standard. The first deliveries are expected with customers by June 2026.…

The 165hp 5165 on the Basak stand is the largest 5000 series tractor so far from the Turkish manufacturer. The refreshed exterior styling is not the only change because the 5165 is the first six-cylinder model in the range. Sitting above the 3.5-litre four-cylinder Deutz powered 5115 (119hp) and 5120 (122hp), the 6.1-litre Stage V Deutz engine in the 5165 is mated to the standard 30f x 15r electro-hydraulic power shuttle (54f x 27r creeper box also available). Top speed is 50km/hr. A sunroof and cab suspension are standard. The options list includes heated electric mirrors and a rear window heater, and a rear-view camera. With 120l/min hydraulics, rear linkage capacity is 9.5t and the optional front linkage lifts 3.5t. Series production of the 7.7t tractor is planned to start…

Kioti has ambitions to grow its market share from 2.5% in Europe to 6.0% by 2030. To help achieve this goal it unveiled a range of new machines at Agritechnica, including its first skidsteer. But the headline act on the stand was the HXS1403 which was being previewed with an autonomous package. The HSX is a higher spec version of he HX, adding load-sensing hydraulics with 500kg more lift capacity. Cab suspension is also part of the upgrade but front axle suspension is not yet available. The HSX will use the same 3.8-litre, four-cylinder engine as the HX and four range, eight powershift transmission with a top speed of 40km/hr. Integrated into the roof of HSX in Hannover was a series of cameras for the autonomous operation. While the ‘dumb’…

Alamo will be introducing the Mantis self-propelled hedge cutter in Europe in 2026. Made in Texas, it has not been confirmed which Alamo business (it owns Bomford, McConnel and Spearhead to name but a few) will handle sales in our market. The machine on show is the second generation of Mantis which is looking to take on the Italian made Energreen and will be similar in price we are told. The tool carrier is powered by a 200hp Deutz and has front and rear ptos for driving additional equipment. The transmission is a hydrostatic unit. Arm reach is 9.0m from the middle of the axle to the outer end of the 1.6m head. The flail head is one of the things which will be changed as the machine is readied…

CALENDAR GOES LIVE 1 DECEMBER 2025 Take part as many times as you like – entry is FREE! WIN! Super-warm and stylish Ladies and Gents padded gilets. Smart red detailing, zip pockets and Väderstad badges front and back. WIN! Get the young farmer in your family busy with a fabulous Deutz-Fahr ride-on tractor equipped with front loader and trailer. WIN! A John Deere 9RX 830 Model Tractor, Britains Prestige Collection 1:32 Scale, Die-Cast Metal Replica, Detailed Interior, Steerable Tracks, Collector’s Edition WIN! A MCHALE DRIVER PACK McHale are proud to present a McHale Driver Pack for the Profi Advent Calendar. This excellent prize includes the following: McHale Fusion 4 Plus 1:32 Scale Model, McHale Backpack, McHale Softshell Jacket, McHale Polo Shirt, McHale Premium Overalls, McHale Beanie Hat, McHale Baseball Hat,…

With approaching 70 tractors on offer at the latest Euro Auctions sale in late October, there was certainly a lot to keep the prospective bidders interested. The selection on offer encompassed those that were only a few of years old and ready for work, to those from an earlier age that were probably in need of preservation. The condition of the machines varied too, with some requiring a lot of work, or to be used for spare parts. As it turned out, the most expensive piece of equipment in this part of the auction was a 2023 Chafer Interceptor self-propelled sprayer that was in excellent condition overall, sold for £57,500. Also on offer before attention switched to the general tractors was a tidy Marooka MK-160 crawler tractor with 4081 hours…

JCB’s already comprehensive range of world-leading Loadall agricultural telescopic handlers is being expanded further with the launch of two new 7.0m machines featuring increased lift capacity and break-out force for greater productivity. • Sway Control chassis-to-front axle levelling option on AGRI Xtra and AGRI Pro hydrostatic and powershift elements with automatic, seamless transitions between the two according to ground speed. Models, variants and features include: • New Loadall 546-70 – 4.6 tonnes lift capacity, 7.0m full lift height – Available to AGRI Super, AGRI Xtra and AGRI Pro specification – Choice of 97kW (130hp), 112kW (150hp) and 129kW (173hp) • New Loadall 555-70 – 5.5 tonnes lift capacity, 7.0m full lift height – Available to AGRI Xtra and AGRI Pro specification – Choice of 112kW (150hp) and 129kW (173hp) •…

Stocks Ag, a leading UK and global manufacturer of Dual Wheel systems and agricultural wheel solutions, has announced the launch of a new Dual Wheel Spacer Band specifically engineered for Moveero Profi Grip Rims. The Moveero Profi Grip rim is widely used on Fendt tractors and other leading brands, designed to work with VF tyres at low pressures to maximise traction, minimise soil compaction and enhance efficiency. The rim’s distinctive elongated rolled edge provides additional strength and durability. Recognising this need, Stocks Ag has developed a purpose-built spacer band to perfectly complement the Profi Grip rim profile. The new design ensures an optimal fit, maintaining the company’s renowned standards for safety, performance and reliability, even on today’s larger, high-horsepower tractors. “When we identified the growing use of Profi Grip rims,…

As part of a new series, two Bitesize Guide publications – one on leadership in agriculture, the other about communicating with people outside of agriculture – have been launched by a partnership between the Nuffield Farming Scholarships Trust and the Royal Agricultural Society of England (RASE). ‘Leadership and developing your career in agriculture; A Bitesize Guide’ and ‘Communicating with people outside of agriculture; A Bitesize Guide’ highlight key findings, discussions and ideas from the extensive library of Nuffield Farming scholar reports. Each Bitesize Guide features short, thought-provoking extracts, including practical advice, case studies, talking points and action plans for future development. QR codes and links allow readers to access the relevant Nuffield Farming report for more information. The Bitesize Guide on ‘Leadership and developing your career in agriculture’ provides ideas…

LEAF (Linking Environment And Farming) has launched the latest version of its LEAF Marque Standard version 17.0, representing a significant evolution in the assurance of more sustainable farming. The update reaffirms LEAF’s commitment to providing a globally relevant and practical framework to build more resilient farming and food systems. The comprehensive review was undertaken with extensive stakeholder engagement from leading farmers, academics, food retailers and producers world-wide. This was carried out alongside public consultations and overseen by the LEAF Marque Technical Advisory Committee. The Standard has been developed as a pragmatic model that can be applied on a wide range of farming systems globally in the context of a commercial operating model. Over the past three years, LEAF Marque has expanded rapidly, from 922 certified businesses in 2022 (64% based…

More than fifty apprentices have graduated from John Deere’s renowned Ag Tech, Turf Tech, and Parts Tech programmes, joining dealerships across the UK and Ireland as qualified technicians and parts specialists. The graduates, trained in partnership with ProVQ at the John Deere Apprentice Training Centre in Upper Saxondale, Nottinghamshire, were recognised at a special ceremony celebrating their achievement and the ongoing success of one of the longest-running manufacturer apprenticeship schemes in the industry. Jacob Ellwood from the Thomas Sherriff dealership was named Technician Apprentice of the Year for 2025, while Alex Hind from Farol won the Parts Apprentice of the Year award. Both received trophies and iPads to mark their success. Now in its fourth decade, John Deere’s apprenticeship scheme continues to evolve to meet the changing needs of modern…

Following the successful Night Edition special editions of the Arion, Axion and Scorpion, Quadrant Evolution customers can now also combine an exclusive look with optimised efficiency thanks to the new Maxi Care Focus range. The limited-edition special series for the Quadrant 5300 FC Evolution and the Quadrant 5200 FC Evolution with Finecut cutterbar is visually characterised by dark grey rims and dark grey coverings in the flywheel and knotter areas, accentuated by Night Edition emblems on the side flaps. MAXI CARE FOCUS COMPONENT WARRANTY AS STANDARD FOR ALL QUADRANT SERIES With the Night Edition, Claas is also introducing the new Maxi Care Focus component warranty, which is now included for all new Quadrant Evolution 5300, 5200 and 4200 models at no extra charge. It includes an extended warranty of five…

Opico has added Simtech direct drills to the portfolio, a line-up that includes the TSG240 and TSG300 grass drills and TS300 arable direct drill. The more sophisticated air drill range starts at 3m and runs through to the range topping 6m TS6004A with front tank and rear coulter frame. Grain only or grain and fertiliser split hoppers are available and additional metering units can be fitted for establishing several crops in one pass. Opico will maintain the established Simtech distribution model selling the drills direct and through specialist dealers. The Lincs-based distributor has set up a web shop where customers can purchase wearing metal and spare parts which can be delivered direct to the farm the next day. Technical support will be provided through the Opico service team with over-the-phone…

The looks of the 104 GT, the latest development in the Xaver autonomous concept, were inspired by the Fendt GT tractor. A 25kW (48v) generator bolted to the 45hp diesel engine powers an electric motor for the hydraulic pump and others for the four steerable wheels. A 9.0kWh battery system provides a short-term power boost, and the vehicle can travel at a top field speed of 10km/hr. The 3.0t weight of the tool carrier excludes the implements, and lift capacity of each of the mid- and rear-linkages is 2.0t. The wheelbase is 3.4m and the fuel tank holds 200 litres. It is envisaged that the autonomous vehicle will conduct time-consuming and repetitive tasks, such as mechanical hoeing. Track width is adjustable to 1.5m, 1.8m, 2.0m or 2.25m. Alongside advanced route…

Indian manufacturer Shaktiman already offers a fixed chamber round baler, but the SRBV-160 is its first variable chamber model. Developed for the European market, bale diameter is from 50cm-1.60m and width is 1.20m. The 3.3t baler has electronic net binding and hydraulic density control and is available with a rotor or 14-knife chopper. Two different pick-up widths are available, and it is on 19.0/45-17 tyres. Shaktiman sees potential to grow its baler business. It already has a conventional square baler and is currently working on its first large square version. The plan is to have something to show before the end of 2026.…

The Tadus T16.20, one of several fully electric tractors at Agritechnica, produces a maximum power of 160hp (120kW). The battery powers five electric motors – one each for the front and rear axles, two others for the front and rear ptos and one for the hydraulics. There is no external power for electric implements. Hydraulic flow is 75l/min (100l/min option), rear lift capacity is 5.0t (front 3.0t), and the tractor’s empty weight of 7.5t can be boosted to a maximum of 10.8t. The 196kWh battery is said to last for 5-10 hours when used around the farm for feeding and loader work. Recharging takes two hours with the 100kWh fast charger. The German company plans to make five pre-production models for 2026 and is ambitiously talking of making the first…

The patented TriForce II coulter arm suspension is the main novelty on the latest reincarnations of the Väderstad Spirit 400-900C/S and Inspire 1200C/S. Taking three years to develop and test, the patented rubber bar profile of the new triangular beam increases the coulter pressure to 120kg (previously 80kg). Väderstad says the new suspension arm provides unmatched seed coulter pressure stability, also at higher working speeds, resulting in a more consistent seed depth. Both drills are available with the new option of hydraulic depth setting of the seeding units from the cab. This is normally done manually at the rear of the machine. There is also a new following harrow option. TriForce I is still available on the 3m Spirit. Scan now to get our weekly news email…

The Frontier from Dutch firm Eox Tractors is a fully electric tool carrier with advanced autonomous driving capabilities. The 150kWh lithium-ion battery pack supplies power to seven electric motors: four-wheel motors, one hydraulic motor, and the front and rear ptos. The electric drivetrain develops 129kW (175hp) at the wheels and 100kW (134hp) at the pto. There are five hydraulic connections (120l/min), the maximum travel speed is 10km/hr, and 4ws and crab steer are both standard. The axles are extendable from 2.25m to 3.20m. The Frontier weighs 8.2t and front and rear linkage lift capacities are 2.5t and 4.5t, respectively. Height including the LiDAR is 2.8m and the turning circle is 9.6m. Two units have been made so far. The plan is to make another five units next year for delivery…

Agritechnica was the first outing for the Stage V version of the 150hp FM World WD1504X from Chinese tractor manufacturer Jiangsu Agricultural Machinery. The top four-cylinder model in the WD-X series, which also includes 115hp and 140hp models, the Chinese block is mated to a 32fx32r mechanical power shuttle. The unballasted weight of 5t for the range-topper can be increased to 6t. Rear lift capacity is 4t and the top speed is 30km/hr. FM World is seeking a UK distributor to sell all three tractors. The 150hp model is currently the most powerful Stage V FM World tractor available in Europe, but in China, the WD range contains four larger six-cylinder models. These are the 160hp and 180hp versions in the WD-E Series and 200hp and 220hp models in the…

JCB was previewing a new cab on the 526-60 and 530-60 which will go into production in Q2 next year. The overall dimensions are the same as the current design, the big change is in the instrument panel with many of the button-controlled functions now being operated by a new 7-inch touchscreen. Not only does this free-up space for additional storage, it gives greater control over functions such as the light and hydraulics which are accessed through a menu structure. The updated cab also coincides with the telehandlers being homologated as tractors.…

Indian manufacturer International Tractors India (ITL) spoke about new 120hp, 130hp and 150hp Solis S-Series models at Agritechnica. Prototypes of all three tractors are running, but it will take another 18 months of tweaks and tests to compete the project. Until then, the details are off limits. The most powerful Stage V tractor currently available Europe is the 110hp S110. Longer term, Solis would like to add a 180hp tractor to the top end of the European range, but this is unlikely to happen for a few years. A tractor that did make it to Hannover is the latest version of the 90hp Solis S90. The main update concerns the cab, the newly designed roof of which has allowed engineers to find another 10cm of head room. The front screen…

Alongside a new precision planter, Bednar was showing its entry to the power harrow drill market with 3.0m and 6.0m versions. Our focus here is on the 3.0m wide Soniq ON3000. Rated up to 250hp, the power harrow is sourced from an Italian firm that uses double bearings and a top cap for easier access than a full top lid. Quick release tines are on the options list and a collar around the rotor keeps stones away from the trough bottom and shaft. The disc coulters are said to be a scaled down version of the Omega, Bednar’s trailed drill range. With these, it weighs 3,520kg plus seed – there is a choice of 1,000- or 1,600-litre hoppers. The coulters can be raised 30cm when you just want to harrow.…

There are four models in the new Zetor 6 Series: the 6130 (130hp), 6140 (141hp), 6160 (156hp) and 6170 (171hp). All use a four-cylinder Deutz 4.1-litre engine mated to a six-stage automatic ZF powershift. Inside the new Pininfarina designed suspended cab is a new air conditioning unit, air suspended and swivelling seat, touchscreen terminal and up to 12 LED work lights. Load capacity of the standard Carraro suspended front axle is 4.7t. The optional 5.3t version allows the total weight of the tractor to be increased from 10t to 11.5t. There are four pto speeds, 120l/min hydraulics and rear lift capacity is 9.7t (front 3.5t). A small number of models have left the Brno plant, and the first 6 Series tractor in the UK, the flagship 6170, is with Tunstall…

Getting their time to shine at Agritechnica is the new generation of short-wheelbase Puma models. There are three models in the Case IH range, the 155, 165 and 185, that’s right the top model has been renamed to coincide with the extra power from the new engine software. There will be three transmission options with the stepless CVX Drive first out of the block in the new year. These will then be joined by the Active Drive 8 in mid-2026 and the already familiar AD 6 will come online by year end. The power curve of the 6.7-litre has been reworked so it reaches max power at a lower revving 1,500rpm. Rated power outputs match the model numbering – 155hp, 165hp and 185hp, while the max power with boost is…

On the MX stand was the new T400 Evo loader. As well as having the option of the dark grey colour-scheme from the U500, these hydraulic self-levelling booms also benefit from new features. Chief among these is the Easy Plug pressure release system for the auxiliary valves. This will be standard on T400 Evo loaders. The booms are also pre-wired for new electric functionality which will be rolled out next year. This will include on-board weighing and auto features. Greasing has also been improved and there is the option of new under boom LED work lights which were first seen on the U500.…

German toolmaker Sonic supplies fully kitted out toolboxes to several well-known automotive and agricultural manufacturers. For instance, the Fendt, Massey and Valtra branded boxes. Maurice Wilke says that they work with each brand so the kits contain the ideal selection of hand tools for working on that machine, such as two sets of spanners and sockets up to size 46, with the bigger box costing €6,900. But what caught our eye was the converted toolbox which had a beer tap on top. This conversion is carried out by Bavarian firm Lehnert Tools (who specialise in diagnostic equipment) and it has sold over 100 of them this year including a number supplied to Fendt. The innards of the toolbox are gutted to hide the keg and chiller unit below the bespoke…

DON’T MISS OUT! MAKE SURE OF YOUR COPY NOW Special offers on now! Visit SHOP.KELSEY.CO.UK/PFIPOLO Buy an annual subscription: SHOP.KELSEY.CO.UK/PFIPOLO Or call: 01959 543 747 AND QUOTE PFIPOLO…

The preservation rally season came to a close at the just excellent Newark Vintage Tractor & Heritage Show over 8-9 November with an excellent footfall right across the Newark Showground with the best weather ever recorded for this show. The event will surely be remembered for the 100+ Caterpillars on site thanks to Tom Balls and his Antique Caterpillar Chapter Two members team. They really brought the Caterpillar centennial to a fitting climax here in the UK. In the George Stephenson Building where the Kelsey Media stand was placed we enjoyed the 80 years of Field Marshall Series 1. Possibly the oldest continuous ownership here went to John Stephenson from East Yorkshire who in 1959 at the age of 11 purchased his Series 1 tractor which was up for sale…

Crowds are flocking to see a special 80th birthday installation at JCB’s lakeside HQ in Staffordshire – a full-sized digger presented as if it were a scale model. Visitors young and old have been marvelling at the ingenious display which has an eight-tonne JCB 3CX Sitemaster backhoe loader packaged in the style of the iconic 1:32 scale models loved by collectors worldwide. The special ‘Backhoe in a Box’ has been unveiled as part of JCB’s 80th anniversary celebrations and will be on display beside the JCB lake at Rocester until January. It stands nearly 15 feet high by nearly 25 feet wide. It is also lit at night. The exhibit also marks a milestone in JCB’s history: more than one million replica models of its machines have been produced under…

Vogelsang has announced it will launch a new UniSpread model at LAMMA in January, alongside a new super-scale separator. The new 12-metre UniSpread will join the existing range to offer an additional one fifth working width. The new XSplit XS30-80 separator offers a throughput capacity of 175 cubic metres per hour. “The new UniSpread is aimed at farmers and contractors who need a compact solution for spreading liquid manure close to roots. The linkage is available as a dribble bar and trailing shoe and features Vogelsang’s tried-and-tested folding mechanism behind the drum, making it an easy retrofit to any size of tanker,” explained Vogelsang’s Andy Hayhurst. The trailing shoe model of the new 12-metre UniSpread will showcase the brand’s DoubleFlow trailing shoe design. “DoubleFlow halves the row spacing from 25cm…

Claas once again showcased innovative process technologies at Agritechnica. In addition to the autonomous use of Torion wheel loaders in material handling and the AI-supported Weed Detector system for effective dock control, practical retrofit solutions for highly automated field cultivation were also presented. TORION AUTONOMY CONNECT: THE FIRST AUTONOMOUS WHEEL LOADER FOR AGRICULTURE Claas presented the first autonomous wheel loader for agricultural use at Agritechnica. The fully autonomous Torion Autonomy connect is revolutionising silage management in biogas plants and dairy farms. In view of the increasing shortage of skilled labour, Claas offers an innovative solution with the fully autonomous Torion to handle repetitive and monotonous wheel loader tasks without an operator. Operators can pre-plan the autonomous use of the machine via Claas connect, whereby the system works intuitively and requires…

Agrii, one of the UK’s leading agricultural distributors, has taken delivery of its first all-electric heavy goods vehicle, the Mercedes-Benz eActros 600 LS ProCabin Stream 4x2, marking a major step in the company’s move towards lower-emission logistics. Supplied by Midlands Truck & Van, the new eActros 600 – which combines zero-emissions operation with class-leading long-distance performance – is one of the first of its kind to enter service in the UK. The vehicle was selected after an extensive evaluation programme, including trials under full load on Agrii’s regular routes. With its class-leading range of over 500km, the eActros 600 was the only electric HGV capable of completing Agrii’s demanding 460km nightly round trip between its central distribution centre and network of depots on a single charge, with energy to spare.…

SIP show the new Spider HD1700-16T trailed tedder for the first time at Agritechnica. The 16 rotors (1.45m diameter) cover a working width of 17.2m. Each unit has lateral movement that can amount to a 2.0m change in height across the spreading width. The running gear of the show machine was on 500/45 R22.5 and there is also a choice of a drawbar or linkage coupling, the latter allowing tighter turns. Now the biggest tedder in the SIP range, it is also the first of its machines to have ISObus. Turn to page 17 for other SIP novelties at the German show.…

The most powerful of three hybrid tractors on the Zoomlion/Rabe stand was the DV3504, with the 350hp engine driving a generator that powers an electric CVT. Zoomlion is also evaluating two more powerful models in China – the DV3804 (380hp) and DV4004 (400hp). Using similar technology, the other two tractors on the stand - the DQ2604 (235hp) and DL1604 (160hp) are already available in China and Russia. Zoomlion also showed the H7-600E hybrid combine prototype. Fitted with a 9.2m header, the direct-drive system replaces traditional belt/chain transmissions with electric motors. This reduces the number of mechanical linkages by 70% for a claimed 30% energy saving. The combine is off to North America for tests, and the plan is to have a model in European fields next year. The three tractors…

Chinese tractor manufacturer Shandong Hanwo showed the latest versions of the HWC Series from 128-158hp, which all have a new suspended cab. The four Yuchai Stage III powered tractors re the 1304 (128hp), 1404 (138hp), 1504 (148hp) and 1604 (158hp). The gearbox in all four is a 16fx8r mechanical power shuttle. The Chinese manufacturer plans to plant a Stage V block in the range and put it through the EU homologation process next year. Hanwo sales manager Gary Li sees Europe as an important growth market. “There is potential for us here,” he says. “Our tractors are built to a high standard and are competitively priced.” In addition to setting up a dealer network in mainland Europe, Hanwo is keen to appoint UK and Irish distributors to take on the…

Chinese firm ZSHX Advanced Tractors showed the Xeevo E904i, the first of a new range of electric tractors. The 4.0t tractor produces a rated output of 90hp (66.1kW). A 30-second power boost increases this to a maximum of 122hp (89.5kW). It depends on the job, but the 103kWh battery is said to last for 4-8 hours. Recharging with the fast 120kWh DC charger takes an hour. “This can be done at lunchtime,” explains ZSHX founder and CEO Yongjun Chen of the Beijing-based company. The battery powers two electric motors; one for the driveline and a second for the PTO. “The beauty of this is that PTO rpm is unaffected by the speed of the engine,” says Mr Chen. Already on sale in China, ZSHX has partnered with the German Solis…

Alongside the new front mower, Sip was unveiling a light-weight triple, the Alpine Disc 800D. Garry Daly from Irish importer Farmec says that there its customers have been asking about a lower cost rear butterfly to help increase output but at a more modest price point. The 7.95m wide model uses a pair of belt driven, seven disc beds. The Disc 340F FC is a pull-type front mower that weights 1,246kg and uses the new S Flow II headstock. This benefits from increased travel which allows it to be raised higher at the headland for better swath clearance. It only needs one hydraulic service - with the pressure line isolated once set, the same spool is used to raise and lower the mower. There is a choice of steel or…

Chinese tractor manufacturer Shandong Shuangli was in Europe for the first time, keen to sign up dealers for its Shonly branded tractors. In China, the company has manufactured tractors for 30 years and reckons to make around 10,000 units a year (24hp to 260hp), where it enjoys a top 10 ranking. Keen to expand overseas and sell its tractors in Europe, power to the 75hp flagship in the M4 range on the stand comes from a 2.9-litre, three-cylinder Stage V Chinese engine mated to a 12-speed mechanical transmission. Hydraulic flow is 40l/min, there are two PTO speeds (540/1,000rpm) and the tractor weighs around 3.5t. The 75hp model carries a 20% to 30% lower price tag than a comparable western brand. The rest of the range is still in the homologation…

The 75hp Avenger 75 XT is the most powerful Stage V tractor so far from Indian manufacturer Preet. Receiving its first airing at the German show, the four-cylinder Simpson engine is mated to a Carraro synchro mesh 12fx12r transmission which reaches a top speed of 34km/hr. Rear lift capacity of the 2.9t tractor is 2.4t, there are two PTO speeds; 540/540e. The European Series also includes a smaller Avenger 65 XT. We will not see them until later next year, but the next step will see 90hp and 100hp Preet-powered models added to the XT range. Described as a no-frills tractor with no complicated electronics, the 75hp tractor is said to be 35-40% cheaper than a comparable western built tractor. Avenger is the export brand of Preet Machinery, and approx.…

The company stresses it is still a prototype, but the Stage V 90hp 6090 is nearly finished and expected to be available sometime in 2026. Developed by Escorts Kubota, the in-house developed 3.6-litre four-cylinder engine produces its maximum power at 2,200rpm. With a top speed of 46km/hr, the 24fx24r synchromesh transmission comes from Carraro, rear lift capacity of the 4.1t tractor is 3t and there are two pto speeds – 540 and 1,000rpm. Farmtrac has developed the 9000 Series front loader for the 9060 and has made a lot of new attachments for it. Another Farmtrac tractor getting a Stage V update is the more powerful 110hp 7110. It is not known when the new 7 Series tractor will be ready.…

Sitting above the current HC2000 tyres for 140-200hp tractors, the Granterra VF range is for tractors from 180-400hp. Main stand outs are the new tread design and longer lugs and the deeper tread pattern is said to benefit traction, grip and stability even in soft or uneven terrain and at low inflation pressures. The raised area between the lugs improves resistance to stubble damage. The first size in the new range is VF710/75R42. More sizes for even more powerful tractors will follow in 2027 and 2028.…

AgXeed used the show to unveil a more powerful tracked autonomous AgBot, but stresses that the T2 7-Series is not simply a case of increasing the power. Like the current 156hp Agbot.115T2, the engine still drives a generator that supplies electricity to the rest of the vehicle, but the Deutz diesel in the 8.0t T2 7-Series is positioned in line (horizontal on the current machine) with the front and rear ptos, the speed of which is steplessly variable from 850 to 1,050rpm. Track width is adjustable from 1.5 to 3.2m, and while the standard 61cm track width is the same as the smaller model (wider 76cm and 91cm tracks also available), reducing the number of bottom rollers from three to four results in more space between them for better track…

The two model 8 Series range from Deutz-Fahr, fills a gap between the 8280 TTV and the more heavy-weight 9340 TTV. It isn’t a Deutz powering this Deutz-Fahr, there is an FPT 6.7-litre lurking below the bonnet supplying the respective 313hp and 340hp partnered with a ZF stepless TMT 32 transmission. There is also a new suspension system for the 11.5t tractor. But it is in the SigmaVision Cab where things get interesting. There is still the clear divide between the cab bulkhead and the engine bay to reduce noise and heat, there is also a laminated glass windscreen option. Cab seat swivel is up to 45 degrees to the right for more comfort, there is a massage function too. The four post cab is 200mm wider, 200mm longer and…

There is a new sense of direction at Versatile, and that direction is leading to Europe. In December 2023, Versatile was purchased by ASKO Holding, a multi-pronged Turkish business which already owns Basak and in construction equipment circles MST to name but two. The plan now is to setup up a European hub for Versatile and get all of its Canadian-built tractors homologated for Europe. While the big wheeled (400hp to 616hp) and tracked (530hp to 616hp) articulated tractors are Europe ready having been sold here previously, it is the five (170hp to 255hp) Nemesis models and the five (275hp to 365hp) MFWD range that need the work. Director of business development in Europe, Arnold Kemkemer reckons the Nemesis tractors will be ready to go on sale here in the…

There may well be a fair number of Kverneland Exacta fertiliser spreaders on the used market, the more so if you also consider their Vicon RotaFlow siblings as an alternative buy. Exacta Geospread variants, that offer considerably enhanced features when compared to the ‘mechanical’ Exacta, arrived from around 2011 and it is now these models that are the most sought after as a used buy. Kverneland Exacta Geospread twin-disc fertiliser spreaders are also branded in Vicon and currently less common Kubota colours, a point to note if you are on the hunt for a particular spreader specification. It is Geospread models we look at mainly here but ‘mechanical’ Exacta variants share the same core spreading elements so much of what follows will also apply to these as well. As Kverneland,…

A fully restored 1963 Fordson Super Dexta tractor sold for an impressive £40,280 at the Cheffins Cambridge Vintage Sale on Saturday 18 October, with all proceeds donated to the new Cambridge Children’s Hospital. This is part of Cheffins’ 200-year anniversary celebrations, where the firm pledged to match the price the tractor made at the auction, bringing the total donation to £80,560. The funds will directly support the creation of a new playroom for children receiving treatment at the hospital. The tractor was bought by Nick Hedges a 67-year-old farmer from Kent. He said: “This is the first vintage tractor that I have ever bought. I bought it for my grandson, who is coming up for two years old and is tractor mad. We found out about the tractor in April,…

Trelleborg Tires successfully hosted the first-ever UK edition of its exclusive Tractor Driver of the Year competition on 16 October 2025 at Prestwold Hall, Leicestershire. Talented tractor drivers from across the UK took part, competing in a series of hands-on challenges designed to test agility, accuracy, and control behind the wheel. The four challenges – hoisting, precision parking, manoeuvring, and reverse manoeuvring – pushed participants to demonstrate true tractor mastery on Valtra tractors fitted with Trelleborg Tires. After a full day of competition, Mitchell Oldershaw was crowned Tractor Driver of the Year UK 2025, achieving an impressive total time of 8 minutes and 49 seconds. His performance earned him the title and the grand prize – the Everyman Racing Platinum Package. Mitchell said: “A big thank you to everyone for…

Avon Tuning HD (ATHD) has launched ‘The Genius’ remapping device to reduce the number of tools currently required to remap agricultural machines, while providing a slicker user interface and improving rural connectivity when on farm. The latest device will replace the ‘New Genius’ and ‘New Transdata’ units currently employed across the agent network, which extends to over 175 across the UK and Ireland. ATHD is the biggest provider of Dimsport remapping equipment across the UK, and the changes will provide several benefits to users. Gareth Jones, managing director at Avon Tuning HD, explained: “While the two existing devices have been reliable and efficient, The Genius is much easier to use and navigate, features advanced hardware and rural connection, and has improved technical support options via a VPN connection. All of…

Massey Ferguson will showcase the recently launched MF 8S Xtra, alongside the brand-new MF 5S with Dyna-VT transmission option, as part of a packed stand at LAMMA 2026. The brand will return to the show for the third year running and, alongside the headline launches, the focus will also be on the compact MF 1M and MF 1700e models. These are not only suited to the smaller farming jobs but are popular machines in diversifications and associated industries, such as tourism, equine and amenity works. Both the recently launched MF 1M and the popular MF 1700e will highlight the options available to users, with a mid-mounted mower deck and scraper attached to the tractors on display. MF will also display the popular MF 5S range, which now has the Dyna-VT…

Kuhn Farm Machinery returns to LAMMA for the second year in a row with a stand full of new and innovative machines to support UK farmers and growers. For arable growers, the new generation Karan trailed sprayer range will take centre stage. Following a four-year development, the Karan delivers high spraying output and innovative technology to improve application accuracy. The Karan – seen for the first time in the UK at LAMMA – extends from basic to premium models, with boom widths from 18m to 45m, and tank capacities of 4,500, 5,200, 6,000 and 8,000 litres. A UK demonstrator machine will be available this spring. Also making its UK debut will be the Highlander tine cultivator, introduced earlier this year. Slotting between the Cultimer and Prolander models, the Highlander offers…

Fendt will showcase the new 500 Gen4, 700 Gen7.1, 800 Gen5 and 1000 Gen4 series tractors at LAMMA 2026. Following a flurry of new tractor releases, Fendt will bring four new tractor series to the UK for LAMMA visitors to see. The most anticipated being the 700 Gen7.1 Vario which sees the 720, 722, 724 and 726 receive Fendt‘s DynamicPerformance power concept, providing an additional 20hp to the whole range, a feature previously only avaiable on the most powerful 728. “The 700 Vario range now offers from 203hp to 303hp. With Power, Power+, Profi and Profi+ specifications this offers operators a sliding scale of specifications that sit between the recently introduced 600 Vario and the newly released 800 Vario,” saod Fendt’s Ed Dennett. The 600 Vario pushed the boundaries of…