Innholdsfortegnelse for Summer 2022 i C10 Builder's Guide

CHEVY C10 trucks have been a lifelong passion of mine since I saw them at my first truck show as a kid. They always seemed like one of those mythical creatures that was well outside my grasp of reality, but once I got into the community, I realized that it’s much more about the lifestyle than the truck itself. The individuals we represent fill the entire country with cool personalities who are willing to help you with your project any day of the week. That’s what makes this community so impressive. It’s not out of the ordinary to see a $100,000 C10 truck owner giving advice or even turning the wrench on a ruste dout patinaed C10 that a friend of his owns. It’s the camaraderie that is born during…

ANDREA Fappani is a name that most folks out there might not be too familiar with, especially to those in the custom pickup truck arena. For those unfamiliar with the name, Italian-born Fappani is quite an influential figure in the highly competitive sport of horse reining. While many of y’all might not have too much interest in the world of pony wrangling, you might find another one of Andrea’s favorite hobbies much more appealing. Andrea has developed a deeply rooted love of custom trucks that started back when he first relocated to Arizona. He made the move to The States quite some years ago to further pursue his career with horses and absolutely fell in love with pickups. The attraction to these vehicles mostly stemmed from the simple fact that…

HE TEARDOWN is complete and parts are finally starting to arrive at our home shop. That means it’s time to jump back on project Rocky, our slightly lifted, two-wheel drive, 1979 Chevy C10 Squarebody. In a previous issue, we fully disassembled this truck completely down to the original frame rails. We set the original body panels aside and ordered the first group of goodies we need to rebuild including cab rocker and corner replacement patches from Auto Metal Direct, OEM factory replacement suspension parts from RockAuto.com, and a set of two-wheel drive lift spindles for an ’88-’98 Chevy C1500 OBS truck from Rough Country. This combination of bolt-on, factory spec hardware should give us around 4 inches of lift on the front of our classic two-wheel drive Chevy C10. Now…

STAGE THREE OF the Street Trucks Showoff Series was an absolute success thanks to the hard-working members on our team here at Engaged Media, as well as the crew at Auto Metal Direct. Gainesville, Georgia, seems like an odd place to hold an outdoor truck show during the month of December, but we decided to move forward anyway to incorporate our year-end award ceremony. This was the first time we ever attempted a live award ceremony and, although there were a few hiccups, we consider it a success and something we can learn from. The weather definitely gave us some problems, but the real hard-core truck guys stuck it out and competed throughout the entire weekend. The field of trucks varied from all makes and models, although Chevy C10s were clearly…

Yes, this ’69 Chevy truck is downright gorgeous on an obvious “eye candy” level, but more importantly, it’s a physical representation of what years’ worth of hard work, dedication and staying true to one’s own style can will into existence. TAKE A GOOD LOOK at this truck. Go on, do it. Yes, this ’69 Chevy truck is downright gorgeous on an obvious “eye candy” level, but more importantly, it’s a physical representation of what years’ worth of hard work, dedication and staying true to one’s own style can will into existence. Now, that’s the epitome of having enviable beauty both inside and out. Family Business This C10 is the product of father/son duo Hector Quintanilla and Hector Jr. of McFarland, California. The Quintanilla family moved to the central California area…

FATHERS AND SONS SHARE MANY types of hobbies, but few can bring them together (or send them into completely opposite directions) like the world of custom cars. James Connerley’s father was the first owner of this ’65 GMC pickup, and his number one priority was to always keep it well maintained and on the road. While James’ dad didn’t do much in the way of customization throughout the years, the care he gave his truck left it in good enough condition for James to take over where his dad left off almost 20 years after he brought it home. In 1983, James officially bought his dad’s GMC knowing darn well that wouldn’t be leaving it in its factory condition for too much longer. “My dad and I shared interest in…

IT’S NOT ALWAYS EASY STAYING grounded when raising a family. The stresses of work life and home life can sometimes seem like a lot to deal with all at once, but Robert Maese of Coral Springs, Florida, has been able to apply a method that has proven to alleviate a lot of potential issues. “I have a wife and four kids (three boys and one girl),” Robert informs us. “I love when we head to car show. My oldest son goes in the garage and picks a car to take, and I jump into a different ride, and we cruise there together.” Robert developed his love of custom vehicles when he was just a kid himself, and he’s so very thankful that he has been able to successfully pass that…

THIS HUMBLE SHOW started when a group of friends got together just to hang out, and it has grown into one of the premier events in the country. More than 1,200 classic GM trucks attend the yearly C10s in the Park event, which is sure to grow again in 2022. In the past, it has been sponsored by Brothers Trucks, which means you know it’s a solid event. Getzendaner Park in Waxahachie, Texas, is the meeting grounds, and September is generally the best month to hold the show. After the daytime truck gathering event at the park is over, everyone attending is invited to cruise over to beautiful downtown Waxahachie for the Party on the Square. Before the night life starts, a representative from US Mags chooses their favorite 50 trucks…

’67-’72 Door Sill Plates EDDIE MOTORSPORT’S NEW 1967-’72 Chevy C10/C20 truck billet aluminum door sill plates are strong, high quality and easy to install. They’re completely machined out of a solid piece of 6061-T6 aluminum to provide a secure and long-lasting part. With precision machining, you get a part that perfectly fits every time. These sill plates are designed as a direct bolt-on to update the standard stamped factory plates. They’re sold in pairs and proudly engineered and machined in Southern California. As with most of the high-quality billet aluminum parts offered by Eddie Motorsports, the C10/C20 door sill plates are available in a bright polished or raw machined finish as well as a variety of Fusioncoat and anodized colors. • Precision CNC machined from high quality 6061 T6 Aluminum•…

MOST YEARS IN the past, our SEMA event coverage for the magazine consisted of killer pictures framing out all the best trucks at that year’s event along with a quick three paragraph synopsis of our experience during the show. Before this year’s SEMA show, it was hard to build excitement in editorial by describing an event we go to and feature each and every year. We get it—SEMA is the place to be once a year if you like anything truck related. The coolest builds, the newest parts and the industry’s top individuals all gather to celebrate a passion we all possess. But what happens if a pandemic hits, SEMA closes shop for a year, and the show comes back with an all new layout and federal restrictions like never before?…

SOMETIMES, THE MOST exciting thing to see at shows is the one off-the-wall truck that was the obvious product of someone’s countless sleepless nights. While these types of builds don’t usually fit the mold of what’s trending necessarily, it’s these creations that tend to explore a builder’s curiosities and answer those nagging “whatifs” that seem to bounce around in one’s head all throughout the day. Mike Garcia of Edinburg, Texas, built a custom truck that goes right along these lines. When he first began planning to cut into his ’87 Chevy C30, he wasn’t looking to follow some cookie-cutter recipe. Instead, he was attempting to manifest a real example of an idea that had only existed inside of his head. “I wanted to entertain the idea of building a truck model…

WITH THE RECENT announcement of the 2022 Hot Rod and Power Tour locations and dates, we have committed to join this exciting five-day road trip tour and enjoy the activities all along the way. We don’t just plan on going to hang out though. We’re looking to compete with the best and make some new friends in the industry. To do that, we need a good truck to travel over 2,000 miles while competing at each and every stop. Project BlueBlood is our very own blue Bow Tie build, and we are turning the wrench ourselves the entire way to the Power Tour, which means lots of late nights and bloody knuckles are in our future. Because we recently replaced the suspension on this 1985 Chevy Squarebody with new coilovers from…

I RECENTLY ATTENDED THE Barrett Jackson Auto Auction in Scottsdale, Arizona. Prior to that, the Mecum Auction happened in Kissimmee, Florida. Both auctions were the first for the two auction companies for 2022, and a lot of trucks—C10s, square bodies and Blazers—were running across the block. Well, the market is hot, and the money was right!! The nice trucks (and most were nice) went for the big bucks. One stellar 1969 C10 sold for $300,000 at Kissimmee, and the “re-auction” from the crowd was, why? Why is someone paying $300K for that C10? Not to bore you with all the details, but it was an extremely nice truck. From the info online (www.mecum.com) it was a 2019 Goodguys Truck of the Year finalist among other awards, and it appeared in the…