Tabla de contenidos para Volume 20 Issue 5 en Creative Beading Magazine

Creative Beading Magazine|Volume 20 Issue 5

Stardust Christmas

MATERIALS 1 x gold clasp and tag BEADS 20 x green 4mm bi-cones9 x 4mm gold stardust beads36 x red 4mm bi-cones106 size 15/0 gold seed beads76 size 11/0 silver seed beads TOOLS Nymo thread2 x English beading needles LENGTH: 18-20cm STEP ONE Thread 1m length of Nymo onto your needle. Leave a 10cm length of thread as a tail. Thread on 1 x green 4mm bi-cone and one side of the clasp, sew several times around the loop on the clasp and go back through the green bi-cone and tie 2 x half hitch knots on the tail. STEP TWO Take the second needle and repeat step one to create two working threads on needles. STEP THREE Needle 1 is on the right hand side, place 1 x silver…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

Mother-Of-Pearl

Mother-of-pearl is a very versatile jewellery component as it can be used in many different ways; inlays, carvings, beads and cabochons. MOTHER-OF-PEARL, also known as nacre, is the iridescent inner lining found in some types of mollusc shells, pearl oysters and freshwater pearl mussel shells, and is also the main component of pearls. It is a very strong and resilient substance that is made up of layers of hexagonal platelets of aragonite (a form of calcium carbonate) arranged in an interlocking pattern, which are separated by sheets of organic matrix, comprised of silk-like proteins. This combination of materials arranged in such a pattern, while brittle on their own, makes nacre a very strong material (almost equivalent to silicone) and also decreases the likeliness of cracking or fracturing. Mother-of-pearl appears iridescent…

6 min.

Creative Beading Magazine|Volume 20 Issue 5

Purple Goddess

MATERIALS 3 x 60cm Tigertail1 x 5cm extension chain with 25mm head pin SP1 x parrot clasp SP2 x 6mm jump rings SP2 x crimps SP2 x Charlotte caps SP2 x cones SP6 x 2 hole Swarovski amethyst sliders2 x 3 hole sliders SP BEADS 6 x 6mm Swarovski rondelles amethyst6 x 4mm Swarovski pearls burgundy6 x 6mm Swarovski pearls burgundy18 x 4mm Swarovski pearls mauve41 x 4mm Swarovski bi-cones amethyst6 x 6mm Swarovski bi-cones amethyst3 x 8mm Swarovski bi-cones amethyst74 x 4mm Swarovski bi-cones light amethyst7 x 6mm Swarovski bi-cones light amethyst6 x 8mm Swarovski bi-cones light amethyst3g x DB080 Miyuki seed beads TOOLS Chain nose pliers Crimping pliers Wire cutters 2 x bead stoppers LENGTH: 50cm STEP ONE Lay out the three pieces of 60cm Tigertail and insert…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Decoration

MATERIALS 1 x 40x30mm Angel Pink Cherub Cameo1 x 46.5x60mm antique silver brass Victorian setting10mm antique silver 5mm brass curb chain14 x silver head pins with balls2 x 5mm antique silver brass jump rings40 x 4mm antique brass jump rings20cm Tigertail BEADS 16 x Czech mixed glass pink and white30 x Toho seed beads Bara Rose mix1 x 6mm Swarovski bi-cone Indian Pink140 x size 11 clear seed beads TOOLS Chain nose pliersRound nose pliersWire cuttersGlue LENGTH: 2 STEP ONE Glue the cameo to the setting. If purchasing the kit, this step has been done. STEP TWO Cut the chain into two 5mm lengths. Set aside. STEP THREE String 1 x seed bead, Czech glass bead and 1 x seed bead onto a head pin. Create a wrapped loop, trim.…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Murano Lampwork

NECKLACE MATERIALS 1 x 40cm Tigertail1 x toggle2 x double loop bead tips2 x crimps2 x jump rings BEADS 15 x Murano or Lampwork18 x 7mm metal spacers2 x 4mm metal spacers24 x 8mm glass20 x size 8 seed beads TOOLS Chain nose pliersRound nose pliersWire cuttersBent nose pliers LENGTH: 45-50cm BRACELET MATERIALS 1 x bail3 x jump rings3 x metal charms1 x stretch magic cord approximately 30cm BEADS 13-15 x Murano or Lampwork14-16 x size 7mm metal spacers EARRINGS MATERIALS 4 x bead caps2 x head pins2 x ear wires BEADS 2 x Murano Lampwork2 x 4mm metal balls NECKLACE STEP ONE Using the photograph as a guide begin with stringing the Lampwork beads with a metal spacer in between each one onto the Tigertail centre. STEP TWO On…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

Yuletide Necklace

MATERIALS 1 x toggle 3 x triangular jump rings gold 11 x head pins gold20cm x small link belcher chain gold50cm x medium link belcher chain gold9 x large belcher chain links gold10 x extenders gold BEADS 2 x 15mm Swarovski teardrops emerald 1 x Swarovski snowflake crystal5 x 8mm Swarovski bi-cones Siam6 x 8mm Swarovski bi-cones CAB TOOLS Flat nose pliersRound nose pliersWire cutters STEP ONE Chain Sets Open 3 x large gold links. Open 18 x medium gold links. Open 3 x small gold links. STEP TWO Attach 1 x medium gold link, 1 x small gold link, 1 x medium gold link, 1 x small gold link, 1 x medium gold link, 1 x small gold link, 1 x medium gold link. To the first medium gold…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

SHOPPING GUIDE

AT THE JETTY At The Jetty3 Beach RoadBeachport SA 5280Ph/Fax: 08 8735 8302 THAT BEAD SHOP Silver and Gold Alloy Bookmarks (Lead Free and Nickel Free). Create your own bookmark with character and style. These Bookmarks make a great gift idea or a quick and easy project. Showcase your favourite beads and charms in an attractive and functional way. Available in a range of styles and designs, starting from $2.00. That Bead Shopinfo@thatbeadshop.com.auwww.thatbeadshop.com.au MY BEADS My BeadsShop 1 /130 Nathan StreetBrighton Brisbane 4017Ph: 07 3869 0880info@mybeads.com.auwww.mybeads.com.au BEADS ONLINE Create expensive looking gifts on a budget. www.beadsonline.com.au LAVENDER DE ROCK Lavender De Rock504-512 Parramatta RoadPetersham NSWPh: 02 95686288 ALL ABOUT BEADS All About Beads www.allaboutbeads.com.au RINGS & THINGS Rings & Things introduces a new full line of supplies for…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

Turquoise Sea Star Necklace

MATERIALS 10 x 16mm solid twisted rings25 x 4mm silver plated jump rings1 x roll 22 gauge artistic wire Silver1 x silver plated toggle ring and bar BEADS 1 x Jet Designs Lampwork Star Bead6 x 13x18mm Turquoise Gemstone ovals4 x 12mm Czech Clear Fire Polished2 x 4mm SwarovskiCrystal bi-cones TOOLS Chain nose pliersRound nose pliersWire cutters LENGTH: 50-55cm STEP ONE Create a wrapped loop bail for the star bead, by cutting 10cm length of wire and placing the star bead with 4mm crystals on each side of the star. Centre the beads on the wire, bend the wire on both sides up and across the top of the bead between two of the star arms. Centre one wire straight up, wrap the second wire around forming a few wrapped…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Charm Set

BRACELET MATERIALS 22cm Tigertail2 x Silver Angel charms2 x Red Enamel Stocking charms2 x Green Enamel Tree charms8 x square bead caps20 x silver star spacers6 x silver hanger spacers3 x silver ribbed spacers6 x silver round thin bead caps1 x silver parrot clasp2 x silver crimps2 x silver wire protectors2 x 4mm silver round spacers6 x silver eye pins BEADS 2 x 6mm glass cubes transparent red2 x 6mm glass cubes transparent green3 x 10mm white glass pearls2 x 8mm Czech Fire Polish Garnets2 x 4mm Swarovski bi-cones Emerald2 x 4mm Swarovski bi-cones Crystal Silver Shade2 x 6mm Swarovski bi-cones Light Siam LENGTH: 18-20cm TOOLS Chain nose pliersRound nose pliersWire cutters EARRINGS MATERIALS 1 pair silver ear hooks2 x 7cm head pins silver8 x square bead caps2 x star…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

Summer Trends

Depressed about the state of the economy? At least we don’t have rationing as they did during World War II! Hypothetically, can you imagine being rationed to buying a couple of beads a week? I certainly can’t as my bead stash is an inspiring box – actually several drawers to rummage through at any time, but especially if I am feeling a little stressed or down. The interesting thing about times of trouble whether it be flood, famine or war or even a financial crash, is that fashion jewellery and in particular big bold and ‘in your face’ jewellery boosts morale in these chaotic times and reflects the lavish movies and upbeat music that flow on to the fashion industry. Even this old poem reflects a bright gemstone brilliance to…

6 min.

Creative Beading Magazine|Volume 20 Issue 5

Oh Xmas Tree Tinsel

MATERIALS 14 x bead caps1 x toggle1.5m x 20 gauge wire42 links of chain29 x jump rings27 x head pins6 x feather charms1 x butterfly charm8 x bright gold leaf charms BEADS 5 x green foil twists8 x 14mm red rounds4 x green rondelles3 x focals9 x Czech crystals red9 x Czech crystals green9 x Czech crystals gold40 x metal coils TOOLS 2 x chain nose pliersRound nose pliersWire cuttersNylon jaw pliers LENGTH: 65cm STEP ONE Foil Twists and 14mm Rounds Cut a piece of wire, make a larger size loop at one end. Thread 1 x coil bead, 1 x foil twist or 14mm round, 1 x coil bead; using a10mm bead on top as a measure bead, trim the wire and form a basic closed loop. Set aside…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

Anastasia Pendant

NECKLACE MATERIALS 27 x 6mm non tarnish jump rings 1 x 10mm non tarnish jump ring 1 x 45cm non tarnish chain 2 x eye pins 1 x head pin BEADS 1 x 6mm Swarovski bi-cone1 x 8mm Swarovski bi-cone TOOLS 2 x curved nose pliers Wire side cutters8mm measure bead10mm measure bead LENGTH: As desired. EARRING MATERIALS 42 x 6mm non tarnish jump rings 2 x 10mm non tarnish jump rings 2 x head pins 2 x 4mm jump rings 1 pair ear hooks BEADS 2 x 6mm Swarovski bi-cone NECKLACE STEP ONE Close 6 x 6mm jump rings. STEP TWO Place 6 x closed jump rings onto your 10mm jump ring and close. This is the first row. STEP THREE Design note: Work left to right. Second row…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

Snow Cones

MATERIALS 4 x small pine cones silver4 x 20cm Tigertail wire silver4 x looped crimps4 x 5mm jump rings4 x large metal rings BEADS 44 x 5mm bi-cone crystals clear4 x 10mm round crystals clear TOOLS Flat nose pliersWire cutters STEP ONE Cut a 20cm length of Tigertail. Place a loop made from Tigertail wire around the top of the pine cone – this is secured in place with a small crimp. STEP TWO Thread 4 x 5mm bi-cone crystals onto the wire followed by 1 x 10mm round crystal; add 7 x 5mm bi-cone crystals. STEP THREE Use a looped crimp to crimp the end of the Tigertail wire. Use flat nose pliers to tightly crimp this together. STEP FOUR Add a metal loop to the pine cones; this…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Totally Infectious!

Sars’ inspiration comes from many sources, a single item can have hundreds of possibilities, or a newly learnt technique can spin her latest range of jewellery in a whole new direction. SARS’ OBSESSION WITH BEADS and jewellery making started young. “I remember sitting in Maisy’s (an elderly friend of my Mother’s) sunroom when I was three or four and staring at her many jars and containers full of beads, buttons and other odds and sods and realising that almost anything can be combined and turned into beautiful jewellery.” She has still got the very first piece of jewellery she ever made – a bracelet with an eclectic mix of vintage buttons, beads and crystals from Maisy’s stash, strung on red cotton thread, a gift for her Grandmother who kept it…

6 min.

Creative Beading Magazine|Volume 20 Issue 5

Partridge Necklace

MATERIALS 1x swallow in tree pendant silver3 x 8mm antique silver twisted jump rings1 x multiple butterfly toggle clasp silver2m 22 gauge non tarnish wire silver BEADS 48 x Czech glass gemstone donuts aquamarine copper TOOLS Chain nose pliersRound nose pliersWire cuttersLENGTH: 50cm STEP ONE Using 22 gauge wire cut it into 48 even segments. Using the round nose pliers, form a wrapped loop eye about 2cm from the end. Thread 1 x donut. Form a wire wrap eye loop to second side. STEP TWO Using the next section of wire, form a wrapped loop adding to the donut created in Step 1, creating interlocking segments of wrapped beads. Create two segments of 24 donut beads. STEP THREE Attach the swallow tree pendant to the middle of two segments of…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Silver Spirals

MATERIALS 1 x spiral ornament50cm x Tigertail2 x 4mm crimp beads25cm organza ribbon BEADS 1 x 8mm Swarovski crystal faceted round 1 x 30mm German crystal faceted teardrop TOOLS Chain nose pliersFlat nose pliersWire cutters LENGTH: As desired. STEP ONE Create a basic loop using round nose pliers at the end of the spiral ornament. Make sure the loop is fully closed. STEP TWO Cut the Tigertail into two equal lengths. Thread both strands of Tigertail through the hole of the crystal drop, position the crystal 10cm from one end. Thread 1 x crimp over all four strands of Tigertail, centre above the crystal. STEP THREE Forming a small triangle between the crimp and the top of the crystal, squeeze the crimp flat using chain nose pliers. Trim short ends…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Decorations

TOOLS FOR ALL Crimping pliers Hot glue gun Wire cuttersPencil used for the silver coils CHRISTMAS CINNAMON STICK BUNDLE MATERIALS 12 x 18cm long cinnamon sticks 4 x large white lilies12 x small flower stems of Poinsiettas2 x stems of mini holly sprays2 x metres gold ribbon4 x metres gold Tigertail wire100 x small gold crimps2 x pieces 20 gauge green florist wire BEADS 50 x mixed sized clear crystals CHRISTMAS CINNAMON STICK BUNDLE STEP ONE Gather the cinnamon sticks into a bundle and tightly wire them together. STEP TWO Make a bow in the centre of the cinnamon sticks. This is done by folding ribbon in half; then through the centre place a piece of florist wire. Gather the ribbon together and pull tightly, this can now be wrapped…

8 min.

Creative Beading Magazine|Volume 20 Issue 5

Observation Bracelet

MATERIALS Beading threadToggle clasp BEADS 7g of 6/0 frosted pink25 x 6mm swarovski pearls5g x 8/0 seed bead TOOLS ScissorsGlue LENGTH: As desired. DESIGNER’S NOTE If you need to lengthen the bracelet add an even number of beads; remember the clasp will add approximately 1.5cm to the bracelet length. STEP ONE Rows 1 and 2 – ladder stitch. Using 2m beading thread needle threads 2 x 2 cut seed beads. Leave a 15cm tail; take the needle through both beads again in the same direction so that they sit side by side. Diagram 1. STEP TWO Add 1 x 2 cut bead, take the thread through the second bead added, go through the last bead just added. Diagram 2. STEP THREE Repeat Step 2 until a total of 52 beads…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

Special Places

MATERIALS 1 x earring stand with base1 x 35x25mm photo frame1 x small photo of loved one2.5m x 24 gauge artistic wire BEADS 9 x 9x14mm mixed Czech glass leaves1 strand 100x3mm Czech fire polished glass5g x size 10 or 11 seed beads TOOLS Bent nose pliersRound nose pliersWire cuttersFlat nose pliersCardboardScissorsCraft glueDiamond glaze (optional) Design note: Please use a true picture and not one printed on inkjet paper as these pictures tend to bleed. STEP ONE Preparing the photo frame Using a piece of cardboard, measure the inner dimensions of the photo frame. Cut out a template to match the size. Place the cardboard over the photo to use and draw a line using the template onto the photo. Cut out the photo, checking that it fits into the…

3 min.

Creative Beading Magazine|Volume 20 Issue 5

Seven Days of Earrings

Monday TOOLS Chain nose pliersRound nose pliersWire cuttersBeading needlePVA glueScissors PENDULUM EARRINGS MATERIALS 1 pair earring hooks2m x beading thread white BEADS 8 x 8mm Orchard Rd rondelles Onyx6 x 6mm Orchard Rd bi-cones Crystal6 x 4mm Orchard Rd bi-cones Onyx3g x 2mm round metal Silver PENDULUM EARRINGSSTEP ONE Thread 1m of beading thread onto a beading needle. Alternately thread 1 x rondelle, 1 x metal bead, for a total of four each. Thread the needle through all of these beads again in the same direction. This will form a circle of beads. Leaving a 10cm tail, tie a double knot. Needle through the closest metal bead and rondelle. STEP TWO Alternately thread 1 x metal bead, 1 x 6mm bi-cone, for a total of four metal and three bi-cones.…

8 min.

Creative Beading Magazine|Volume 20 Issue 5

Masterclass with Lampwork Beads

PANSY MATERIALS 1 x gold magnetic clasp2 x snips of French wire1 pair ear wires2 x head pinsSilver nymo BEADS 1 x Lampwork Pansy oval4 x Lampwork Pansy squares8 x 4mm Swarovski Pearls soft green2 x 6mm Swarovski Pearls soft green1 x 8mm Swarovski 5040 donut Padparadscha4 x 6mm Swarovksi bi-cones PadparadschaSize 11 seed Mill Hill 3057Size 11 seed Czech green peridot TOOLS Beading needleScissors LENGTH: 45cm I am so attracted to Lampwork beads of all shapes, sizes, colours and finish. Even though my husband makes Lampwork beads I still find myself stopping at every stand at a bead show to examine my next Lampwork purchase. Do you find some beads just say ‘take me home immediately’ and you know you have to take them home … but after careful…

7 min.

Creative Beading Magazine|Volume 20 Issue 5

Festive Charm

MATERIALS 1 x stretch chain bracelet 5 x head pins 6 x assorted enamel metal charms 2 x metal charms BEADS 5 x 6mm red rounds5 x 6mm green bi-cones5 x metal spacers TOOLS Bent nose pliers Flat nose pliers Wire cutters LENGTH: As per stretch bracelet. STEP ONE Designing the pattern Lay out the beads and charms around the bracelet to get an idea of where they will best fit. Take the bracelet away leaving the beads in place. Start by connecting the charms using the jump rings already attached to the bracelet. STEP TWO Connecting charms with jump rings Open one jump ring on the bracelet using two pairs of pliers. See Basic Instructions for additional help. Thread on the charm and close the ring. Making sure the…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Viking Charm

MATERIALS 1 roll or 9m 26 gauge artistic wire1m 22 gauge artistic wire to start up2m 24 gauge artistic wire30cm 22 gauge artistic wire contrasting1.5m 22 gauge artistic wire1 x toggle clasp40cm of fine chain10 x head pins 3 x cone beads or glue in end caps 3 x 4mm jump ringsParrot clasp – optional BEADS 5 x 10mm rice shaped freshwater pearls11 x 4mm spacer beads TOOLS 1 dowel rod10mm diameterChain nose pliers Round nose pliers Wire cuttersGlueDraw plate LENGTH: As desired. STEP ONE Viking Knitting Using 22 gauge contrasting wire, wrap the wire around a business card for five complete wraps. Pull the wire off carefully and form a bundle. With the long end of the wire, wind it around the bundle a couple of times at about…

4 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Chained Charms

MATERIALS 8cm gold chain14cm Flex wire2 x crimp covers5 x eye pins6 x head pins Crimps BEADS 11 x 8mm green Czech beads2 x 6mm green Czech beads11 x 4mm red Czech beads5 x mixed Christmas charms TOOLS Chain nose pliers Round nose pliersWire cuttersCrimping pliers LENGTH: 18-20cm STEP ONE Using 14cm of Flex wire, thread 1 x crimp and one end of the clasp set. Take the end back through the crimp creating a loop around 5mm, holding part of the clasp set in place. Leaving a 1cm tail, flatten crimp in place using crimping pliers. Place crimp cover over the crimp and gently close using chain nose pliers. STEP TWO Thread onto the flex wire 1 x 10mm crystal, slide down the wire hiding the tail inside this…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Glassy, Crystal Pearly Sea Set

MATERIALS 60cm rope chain50 x head pins1 pair earwires7 x eye pins5cm cable chain Clasp2 x jump rings BEADS 65 x 3mm round silver spacers14 x 6x8mm blue rice pearls15 x 5-6mm green irregular pearls12 x 8mm black faceted crystals2 x black faceted rice crystals7 x dichroic glass rondelles14 x 6x3mm black crystal rondelles TOOLS Chain nose pliersRound nose pliersWire cutters LENGTH: 65cm NECKLACE STEP ONE Cut rope chain into six pieces; 2 x 18cm long, 3 x 5cm long, and 2 x 3cm long. STEP TWO Make six dichroic glass sections including two for the earrings. Using 1 x eye pin, thread 1 x 3mm silver spacer, 1 x 6x5mm black crystal rondelle, 1 x dichroic glass rondelle, 1 x black crystal rondelle, 1 x 3mm spacer. Form a…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

Victorian Empress

MATERIALS 3.5m 6lb Smoke Fireline BEADS 65 x 3mm Czech Fire Polished rounds Jet Vitrail (3FPR)130 x 4mm Czech Fire Polished rounds Jet (4FPR)1 x 6mm Czech Fire Polished round Jet (6FPR)1 x 8mm Czech Fire Polished round Jet (8FPR)1 x 10mm Czech Fire Polished round Jet (10FPR) 1 x 20 inch strand size 11 seed beads Black (S11)3.5g size 15 seed beads Black (S15) TOOLS Size 12 beading needleClear nail polishLENGTH: 50cm STEP ONE Thread a needle onto each end of 1.5m of Fireline. Pick up 4FPR and move it to the centre of the thread. STEP TWO On bottom needle pick up S15, 4FPR, S15, 4FPR. STEP THREE On top needle pick up S15, 4FPR, S15 and pass this needle down through the last 4FPR added in Step…

5 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Presents

MATERIALS 25cm Tigertail16 x head pins26 x 3mm silver disc spacers8 x 5mm jump rings34 x bead caps8 x metal barrel beads with loops8 x charmsToggle clasp4 x crimp beads BEADS 9 x 12mm round AB crystals4 x 6mm white shells4 x 8mm frosted red glass4 x 6mm frosted red glass4 x 10mm shell pearls TOOLS Chain nose pliersRound nose pliersWire cuttersCrimping pliersLENGTH: 18-20cm STEP ONE Attach one end of your toggle clasp using a crimp; flatten or fold using pliers. STEP TWO Slide on the beads onto Tigertail in this order: Bead cap, 12mm crystal bead, bead cap, barrel bead with loop. Repeat a total of NINE times, or adjust length desired here. Place in bead stopper to hold while working remainder of bracelet. STEP THREE Make 16 dangles…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Silver by Midnight

MATERIALS 13 x sterling silver two hole hourglass spacers1 x sterling silver clasp set4 x sterling silver wire protectors40cm Tigertail4 x silver crimps BEADS 28 x 8mm faceted glass beads – Midnight TOOLS Chain nose pliersRound nose pliersWire cuttersCrimping pliers LENGTH: 20cm – or as desired. STEP ONE Cut Tigertail into 2 x 20cm lengths, adjust length if needed by using longer Tigertail in this step and add more beads in the next step. Thread 1 x crimp onto 1 x piece of Tigertail, pass the wire through 1 x wire protector. Add wire protector to 1 x jump ring on the clasp set. Continue threading the wire through the ring and the second side of the wire protector, going back into crimp. Tighten the wire and fold crimp. STEP…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Charm

MATERIALS 6 x Christmas charms6 x wine rings BEADS 12 x 4mm pearls green12 x 6mm Czech clear12 x 6mm pearls red TOOLS Chain nose pliers STEP ONE Gently fold kink on wine rings down to allow threading of beads. STEP TWO Thread 1 x each of 4mm green glass pearl, 6mm clear Czech, 6mm red glass pearl, Christmas charm, 6mm red glass pearl, 6mm clear Czech, 4mm green glass pearl. STEP THREE Fold kink back up to secure beads. Repeat for all wine rings until you are complete. At The Jetty3 Beach Road Beachport SAPh: 08 8735 8302www.beadsatthejetty.com.au Rating…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

Christmas Dance Set

MATERIALS 60cm 18 gauge gold artistic wire1 x toggle4 x large gold bead caps8 x small gold bead caps10 x 6mm jump rings8 x 38mm eye pins BEADS 1 x Christmas snowflake charm6 x 8mm red2 x 12mm red4 x 10mm green4 x gold spacers TOOLS Chain nose pliersRound nose pliersSide cutter and a jig LENGTH: As desired. STEP ONE Jig 1. Using 3 x 4mm jig posts make 10 wire pieces. Jig 2. Starting the same as Jig 1 and looping it right around the middle post before continuing the pattern. Make one. STEP TWO Using 1 x eye pin, thread 1 x small bead cap, 10mm green bead, 1 x small bead cap, add spacer and repeat with 1 x small bead cap, green bead and 1 x…

1 min.

Creative Beading Magazine|Volume 20 Issue 5

WHAT'S NEW KITS

BEADS ONLINE www.beadsonline.com.au AT THE JETTY Lots of new Christmas decorations to choose from. Great Value! GET BEADED Need to bling up your outfit or just looking for an easy and fun gift idea? Check out the new range of Swarovski glue in kits from Get Beaded. Available in a range of styles and colours to suit everyone! Full range can be found in store, online or ordered over the phone. Get BeadedShop 155 George Street, WindsorPh: 02 4577 2717 – Open 7 dayswww.getbeaded.com.au At The Jetty3 Beach RoadBeachport SA 5280Ph/Fax: 08 8735 8302 JET BEADS & CRAFT Available while stocks last. All supplies for these kitsavailable at Jet Beads & Craftwww.jetbeadsandcraft.com.auShop 17, 514 Warwick Road, YamantoShopping Village, Yamanto Qld 4305Ph: 07 3288 0156 orEmail: tania@jetbeadsandcraft.com.au MAD MONNIE DESIGNER JEWELLERY…

2 min.

Creative Beading Magazine|Volume 20 Issue 5

10 Projects for $10 each

TOOLS Chain nose pliers Round nose pliers Wire cutters 1. OLIVINE GREEN WATER LILY EARRINGS MATERIALS 2 x gold plated water lily charms2 x daisy spacers antique gold40cm x 22 gauge non-tarnish wire gold1 pair gold plated earring wires BEADS 2 x 8mm Swarovski crystal bi-cones olivine green2 x 6mm Swarovski crystal bi-cones olivine green2 x 4mm Swarovski crystal bi-cones olivine green 1. OLIVINE GREEN WATER LILY EARRINGS STEP ONE Using 22 gauge wire cut four segments x 20cm. Using first section of wire thread 1 x 8mm bi-cone into the middle of the wire. Bend around over the bi-cone, and create a coil at the top. STEP TWO Using one strand of wire thread 1 x 4mm bi-cone and wrap around into a coil at the top. Trim one…

9 min.